The History of
Weather-Bos™

Why use Weather-Bos™?

Comparisons

Customer Testimonials

Uses for Weather-Bos™ (i.e. roofs, sidings, fences)

Industries using
Weather-Bos™ (i.e. architects, contractors, wood product
manufacturers)

Truth vs.Confusion

Spec and Technical Data

The advantages of Pre-
Staining your wood

How Much Weather-Bos™
do I Need?

Why does wood turn grey
and dull?

The science behind the
stains which occur on wood
.

How to Become a
Weather-Bos™ Distributor/Manufacturer

Weather-Bos™ Seminars

Frequently Asked Questions

Toll free Order 1-800-664-3978

For Durable High Performance Water Protection
SIMPLE DIRECTIONS FOR MASONRY BOSS™

PREPARE SURFACE

Pressure wash, sweep, dust or wire-brush to remove dirt and debris. If efflorescence (white residue) is present, wash surface with required amount of cleaning solution, then rinse with water.

APPLICATION

Use any agreeable application method: brush, roller or spray. Apply one coat liberally so as to flood the surface to a maximum absorption as indicated by a run-down of 6 to 12 inches, but not to allow to puddle on horizontal surfaces. Application notes:

  • It is important to apply to dry surfaces in warm temperatures and/or direct sunlight.
  • If thorough saturation is obtained, one coat will give excellent water repellency.
  • No thinning is necessary.
  • Do not apply if rain is likely to occur soon after application.
PRIMARY USES:
  • Stucco
  • Concrete slabs
  • Marble
  • Stone masonry
  • Walkways
  • Brick
  • Tile roofs
  • Tile floors,
  • showers,
  • kitchen counters
  • Concrete porches
    and steps
  • Man-made
    masonry veneering
  • Tile grout
CLICK ON THE SUN TO REQUEST FURTHER INFORMATION
Home Frequently Asked Questions Uses Product Information Business Opportunity Search Purchasing Environmental Issues

©1996-2005 Weather-Bos™ International. All Rights Reserved. Website Design by Hinman Associates.